Skip to content
Erva 5 Piece Feeder Pole Set with Twist In Ground Socket

5 Piece Feeder Pole Set with Twist In Ground Socket

by Erva
$71.99 - $71.99
$71.99
$71.99 - $71.99
$71.99
Availability:
6 in stock, ready to be shipped

Get it between -

80" Heavy duty 5-piece sectional pole set. This is the heaviest-duty American-made commercially-available tubular bird feeder pole.

Product Details:

  • Includes 3 pole sections at 1" outer diameter, flange plate top (FPTNF) to mount a wooden feeder or house, and a twist in ground socket.
  • This pole has a 0.060 wall thickness (16 Gauge) and will not rust through.
  • Powder-coated with an automotive quality polyurethane and lead-free black, baked-on finish.
  • Finished height from ground to the bottom of the hangers is approximately 80"

Made in the USA.

Shipping Information

In-stock orders placed by 2pm EST typically ship the same day.

All items ship for a flat rate of $6.95 to $11.95 depending on item size and destination. All orders totaling $89.00 or more will ship for free.

Expedited shipping options such as UPS 2-Day and Next Day are available on the checkout page.

EXCEPTIONS: Some very large or overweight items may require extra shipping charges. Extra charges are noted in the main product description. Orders shipped to Alaska and Hawaii are charged based on actual shipping rates.

Click here for more details on shipping policies and ship times.

Warranty and Returns

We want you to be satisfied with your purchase which is why we offer a 45 day return policy.

Click here for full details of our return policy.

Each manufacturer specifies their warranty period. We are always happy to help make sure any vendor warranties are resolved to your satisfaction.

Customer Reviews

Based on 15 reviews
87%
(13)
7%
(1)
7%
(1)
0%
(0)
0%
(0)
L
Lisa H
Great set with a few adjustments

I bought this pole system to use with a large covered platform feeder. The main piece that goes into the ground was easy to install and very sturdy as it’s 20” long. When I started adding the pole pieces they were wobbly. I had to put one piece of electrical tape around each swaged end of pole and now they are nice and snug and the pole stands up straight, even with a heavy covered platform feeder on it. I found it a little too tall (80” and I’m only 63” tall) so I bought a shorter pole piece to replace the 3rd piece that came with the set. This baffle is the best I've seen. The solid metal collar with adjustable screws for easy assembly is genius. The system works, and looks, great! The birdies are very happy.

User picture

Thank you for taking the time to review! We are so glad to hear the pole system is working as intented. Yes, the poles are made to provide a little wiggle room as the manufacturer wanted people to be able to interchange with their older pole extentions that were a little different in size. The black electrical tape is a great solution for any bit of wobble, and one that the manufacturer recommends! Happy bird feeding!

R
Robert Petkash
Bird feeder pole set

The following is my comment about the pole set that I sent directly to Erva Tool. I did not get a reply from them.
"I purchased your 5-piece Feeder Pole Set with Twist-In Ground Socket online from Nature Niche in Michigan. When I opened the box, I was really impressed with the quality of the poles. The material is thick and substantial. The weld is continuous and clean. The finish appears to be long-lasting. And a plus is that it's made in the USA. But, when I began to install the pole, I found the swaged end was a bit smaller than the opening in the female end of the pole. When the three sections were assembled and stood up, they waved in the air like a wet noodle. The top moved at least +/- an inch. I tried shimming at the base to no avail. The pole waved around and made it impossible to get it to stand straight up. I puzzled over the problem for a while and decided the best solution would be to glue the sections together using a high-strength epoxy. I was able to get the assembly straight by laying it on the floor and clamping it to a flat upright surface. The next morning, I had a sturdy, straight one-piece pole. I was then able to insert it into the socket using a thin plastic shim for adjustment and got it perfectly straight up. I also reversed the position of the pole from your instructions so the swaged end would face upward so water could not enter at the seam. To ease this problem, I would suggest you make the swaged end at least a tap fit into the female end or, even better, make the connection threaded.
Your product is great, however it needs to be tweaked a bit to make it better. I look forward to a long life for my new bird feeder pole."

Robert Petkash

Thanks for sharing that feedback and for sending it to Erva directly. They may not have responded, but I suspect they will consider your suggestions. I imagine they avoid the screw together assembly, because that is very hard to keep consistent across batches and years of products and harder to disassemble over time. Also likely drives the cost of the product up. Here's what they have told us about why and how to resolve the sometimes loose slip fit issue:
The reason for the sometimes looser fit is that Erva tries to maintain a sizing sweet spot from production run to production run. They could achieve a perfect fit, if they ran just one batch. The trouble is there is variation in size for this tubing (to say nothing of batches in past years - still in the field), and the next batch from the vendor might be off a couple of thousandths of an inch. They choose to err on the side of a looser fit, because customers sometimes add sections years after the original purchase, and they want to be sure they will fit.
To fix the loose slip fit, cut a 1' piece of electrical tape and apply it to the swaged portion of the pole close to the end. If it's still loose, cut a second or larger piece of electrical tape and apply. This will definitely fix the problem.
Hope this explanation helps!

A
Adam Nisson

I wish it came with a squirrel baffle.

This pole set is also available in a bundle with a baffle (https://nature-niche.com/products/5-piece-feeder-pole-set-flange-top-and-baffle?_pos=5&_sid=5fd4f88a0&_ss=r), but you can purchase a separate baffle here: https://nature-niche.com/products/dome-top-squirrel-baffle-and-squirrel-guard?variant=34814753865883

m
mike west
AAAAAA +

AAAAAAA+++++++

M
Matthew Will
5 Piece Feeder Pole Set with Twist In Ground Socket

This is exactly what I needed, it's machined well, sturdy and easily screwed into the ground despite many roots and rocks. I recommend this product.

123